The Butcher GRID TRAIL 2Bliss Ready T7 features a World-Cup proven aggressive tread design to bite and grip in any condition. Ramped and siped, the center tread blocks provide maximum traction and accurate steering. The sawtooth faced shoulder knobs offer a continuous biting edge for railing through corners. Our GRID TRAIL casing is a step up from GRID with more reinforcement, delivering better handling at lower pressures—all while increasing pinch flat protection by 15% and puncture protection by 30%. Building on this solid base, the T7 GRIPTON® compound enhances rolling speed while still providing tons of grip.

• Casing: 60 TPI, tough trail construction with additional bead to bead protection for exceptional puncture resistance, sidewall stiffness and stability.
• Bead: Foldable
• Butyl wrapped bead = 2Bliss Ready
• Compound: GRIPTON® T7
• 26 x 2.3", psi 25-50, approximate weight 830g
• 27.5 x 2.3", psi 25-50, approximate weight 900g
• 27.5 x 2.6", psi 20-40, approximate weight 950g
• 27.5 x 2.8", psi 20-40, approximate weight 1100g
• 29 x 2.3", psi 25-50, approximate weight 940g
• 29 x 2.6", psi 20-40, approximate weight 1020g

The latest generation of the World-Cup-proven intermediate tire, the Butcher CONTROL 2Bliss Ready, receives an entirely new tread pattern. Wider shoulder knobs better support load under hard cornering, while the biting edges of the shoulder knobs are moved further inside, and the center blocks have been staggered and spaced better for a smoother transition when leaning the bike over. Meanwhile, our proprietary GRIPTON® compound improves high frequency damping, attaching the tire to the ground better on both small bumps and rough sections. The low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy absorbed and keeping speed high. Once you ride the Butcher, you'll never want another tire for your gravity excursions. It's the perfect choice for your gravity excursions—one ride and you'll be hooked.

• Casing: 60 TPI
• Bead: Foldable
• Butyl wrapped bead = 2Bliss Ready
• Compound: GRIPTON®
• 29 x 2.3", psi 25-50, approximate weight 850g

• Ελεύθερο πίσω γρανάζι με 18 δόντια από την Sturmey-Archer, με αλυσίδα 1/8" για BMX.

  *M35 (Αφαλός Τροχού 35mm) 

  Τύπος: Ελεύθερο

  Αριθμός γραναζιών:1

  Δόντια:18

   

• Ελεύθερο πίσω γρανάζι με 16 δόντια από την Sturmey-Archer, με αλυσίδα 1/8" για BMX.

  *M35 (Αφαλός Τροχού 35mm) 

  Τύπος: Ελεύθερο

  Αριθμός γραναζιών:1

  Δόντια:16

  Βάρος: 194gr

TAG Metals T3 Nylon Mountain Bike and Dirt Jump Pedals

T3 Nylon Pedals are made from a strong and lightweight thermoplastic Nylon and have 40x replaceable 3mm pins to keep your foot in place on the 110X100mm platform when you stomp a landing or plough through a rock garden. 

Internally, the T3 Pedals have a DU bushings and sealed cartridge bearing paired with a CNC machined Cro-Mo axle and access is easy for servicing and maintenance. 

T3 Nylon Pedals are available in 7 colours. 

Features: 

• Weight 362g pair

• DU Bushings and sealed bearing
• CNC machined Cro-Mo axle
• Engineered nylon thermoplastic
• 3mm high replaceable pedal pins
• Platform 110mm x 100mm
• Easy access for servicing and maintenance
• 40 pins per pair
• 7 colours

TAG Metals T3 Nylon Mountain Bike and Dirt Jump Pedals

T3 Nylon Pedals are made from a strong and lightweight thermoplastic Nylon and have 40x replaceable 3mm pins to keep your foot in place on the 110X100mm platform when you stomp a landing or plough through a rock garden. 

Internally, the T3 Pedals have a DU bushings and sealed cartridge bearing paired with a CNC machined Cro-Mo axle and access is easy for servicing and maintenance. 

T3 Nylon Pedals are available in 7 colours. 

Features: 

• Weight 362g pair

• DU Bushings and sealed bearing
• CNC machined Cro-Mo axle
• Engineered nylon thermoplastic
• 3mm high replaceable pedal pins
• Platform 110mm x 100mm
• Easy access for servicing and maintenance
• 40 pins per pair
• 7 colours

TAG Metals T3 Nylon Mountain Bike and Dirt Jump Pedals

T3 Nylon Pedals are made from a strong and lightweight thermoplastic Nylon and have 40x replaceable 3mm pins to keep your foot in place on the 110X100mm platform when you stomp a landing or plough through a rock garden. 

Internally, the T3 Pedals have a DU bushings and sealed cartridge bearing paired with a CNC machined Cro-Mo axle and access is easy for servicing and maintenance. 

T3 Nylon Pedals are available in 7 colours. 

Features: 

• Weight 362g pair

• DU Bushings and sealed bearing
• CNC machined Cro-Mo axle
• Engineered nylon thermoplastic
• 3mm high replaceable pedal pins
• Platform 110mm x 100mm
• Easy access for servicing and maintenance
• 40 pins per pair
• 7 colours

TAG Metals T3 Nylon Mountain Bike and Dirt Jump Pedals

T3 Nylon Pedals are made from a strong and lightweight thermoplastic Nylon and have 40x replaceable 3mm pins to keep your foot in place on the 110X100mm platform when you stomp a landing or plough through a rock garden. 

Internally, the T3 Pedals have a DU bushings and sealed cartridge bearing paired with a CNC machined Cro-Mo axle and access is easy for servicing and maintenance. 

T3 Nylon Pedals are available in 7 colours. 

Features: 

• Weight 362g pair

• DU Bushings and sealed bearing
• CNC machined Cro-Mo axle
• Engineered nylon thermoplastic
• 3mm high replaceable pedal pins
• Platform 110mm x 100mm
• Easy access for servicing and maintenance
• 40 pins per pair
• 7 colours

TAG Metals T3 Nylon Mountain Bike and Dirt Jump Pedals

T3 Nylon Pedals are made from a strong and lightweight thermoplastic Nylon and have 40x replaceable 3mm pins to keep your foot in place on the 110X100mm platform when you stomp a landing or plough through a rock garden. 

Internally, the T3 Pedals have a DU bushings and sealed cartridge bearing paired with a CNC machined Cro-Mo axle and access is easy for servicing and maintenance. 

T3 Nylon Pedals are available in 7 colours. 

Features: 

• Weight 362g pair

• DU Bushings and sealed bearing
• CNC machined Cro-Mo axle
• Engineered nylon thermoplastic
• 3mm high replaceable pedal pins
• Platform 110mm x 100mm
• Easy access for servicing and maintenance
• 40 pins per pair
• 7 colours

TAG Metals T3 Nylon Mountain Bike and Dirt Jump Pedals

T3 Nylon Pedals are made from a strong and lightweight thermoplastic Nylon and have 40x replaceable 3mm pins to keep your foot in place on the 110X100mm platform when you stomp a landing or plough through a rock garden. 

Internally, the T3 Pedals have a DU bushings and sealed cartridge bearing paired with a CNC machined Cro-Mo axle and access is easy for servicing and maintenance. 

T3 Nylon Pedals are available in 7 colours. 

Features: 

• Weight 362g pair

• DU Bushings and sealed bearing
• CNC machined Cro-Mo axle
• Engineered nylon thermoplastic
• 3mm high replaceable pedal pins
• Platform 110mm x 100mm
• Easy access for servicing and maintenance
• 40 pins per pair
• 7 colours